Fusion Pellet Stove
Clean lines and compact design combine high efficiency,clean burning and automatic control with all the warmth and comfort of wood heating. With a 9kW output, the Fusion pellet stove provides a beautiful warmth and is suitable for any large room.
Features
- Automatic start up cycle
- Modulating heat output capacity from 3.2kW – 9.1kW
- Built in room thermostat
- Optional remote control thermostat
- 7 day programmer 2 on/off periods per day
- Efficiency > 81%
- Automatic chimney cleaning cycle
- Fan assisted convection air
- Room humidifier
- Automatic overheat and chimney safety shutdown
- Hopper capacity 25kg
- Removable ash tray & burn pot
Dimensions
- Height 1032mm
- Width 637mm
- Depth 566mm
| Model | Boiler Output | Room Heat | Radiators |
|---|---|---|---|
| Fusion NB | N/A | From 3.2kW to 9.1kW | N/A |
Servicing and commissioning
- This stove qualifies for the Greener Homes Grant scheme. Contact Sustainable Energy Ireland 1850 734 734 or http://www.sei.ie/
- This stove should be commissioned by a Stanley Engineer. Contact the Stanley service department to arrange free commissioning.
- It is recommended that the firebox is clean periodically and the appliance is serviced by a Stanley Engineer annually.
Installation requirements
- Power Supply: 230V 50Hz via 13 amp plug top.
- Minimum of 400mm clearance to combustibles
- Install on a level, non combustible hearth, 1020mm (d) x 910mm (w).
- 6mm diameter pellets must be used.
Colour Options
